Comtech EF Data CME-5200 Specifications Page 18
- Page / 54
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CME-5200 Digicast Media Router ASI Receiver Revision A
Installation & Initial Configuration MN/MRASIRCDC.IOM
• Contact Comtech EF Data Customer Support if the shipment is:
! Incomplete
! Physically damaged
! Inoperable
2.3 Installation
The ASI-R is designed for ease of installation and configuration. Once the unit has
been removed from the packing container, please follow these instructions:
Step Procedure
1 Place the ASI-R on a flat surface with free-air flow where the LEDs can be
clearly observed with unrestricted access to the rear panel of the unit.
2 Connect the DC power connection to the connection labeled PWR on the
back of the unit and tighten the restraining nut to ensure secure operation.
3 Connect an RJ-45 Ethernet cable (patch cord) to the port labeled
ETHERNET. This cable should be connected to an Ethernet concentrator
(hub) or switch.
4 Connect a terminal cable (supplied) to the port labeled TERM. This cable
should be connected to a PC’s serial port (DB-9) to initially configure the
ASI-R.
5 Connect the AC power cord between a standard wall outlet and the power
supply. The blue LED will illuminate.
6
IMPORTANT
It is recommend that the ASI cable NOT be connected until the
unit has been completely configured.
Upon startup, the following LEDs will illuminate on the ASI-R front panel:
LED Function Label Description
Blue
POWER
LED illuminates if power is properly applied
Red
ALARM
LED may illuminate since the unit is not yet
configured
Green
M-ACT
LED illuminates if MPE data is present
Green
E-ACT
LED flashes if there is Ethernet traffic/activity
7
Green
E-LINK
LED illuminates if the Ethernet connection to
the Hub/Switch is operational
2-2
- CME-5200 1
- Table of Contents 3
- MN/MRASIRCDC.IOM 4
- Figures 6
- Preface 7
- About this Manual 8
- Conventions and References 8
- Cautions and Warnings 8
- Preface MN/MRASIRCDC.IOM 9
- NOTE 10
- Warranty Policy 11
- Limitations of Warranty 11
- Exclusive Remedies 12
- Chapter 1. INTRODUCTION 13
- 1.3 Performance 14
- 1.4 Configuration 14
- 1.5 Specifications 15
- 1.6 Terminology 16
- INITIAL CONFIGURATION 17
- IMPORTANT 18
- 2.4 Initial Configuration 19
- Chapter 3. INTERFACE PINOUTS 21
- 3.4 RJ-12 Redundancy 22
- 3.5 RJ-45 Ethernet 22
- 3.6 BNC ASI IN 22
- Chapter 4. DEVICE MANAGEMENT 23
- VIA USER INTERFACES 23
- 4.2.2 Network Configuration 26
- 4.2.3 IGMP Configuration 27
- 4.2.5 PID Configuration 29
- 4.2.7 Statistics 31
- 4.3 Terminal Interface 32
- 4.3.1 Main Menu 33
- 4.3.3 Administration Menu 34
- 4.3.6 PID Configuration Menu 36
- 4.3.8 Stats Menu 37
- 4.3.8.1 DMA Stats Menu 38
- 4.3.8.3 MPEG TS Stats Menu 40
- 4.3.8.4 Ethernet Stats Menu 41
- IMPORTAN 43
- Appendix A. SOFTWARE 45
- UPGRADE 45
- Appendix B. IP ROUTING 49
- SUPPORT 49
- B.2.2 Multicast Routing 50
- B.3 Section Packing 51
- METRIC CONVERSIONS 53
- Units of Length 53
- Temperature Conversions 53
- Units of Weight 53
- 480 • 333 • 2200 PHONE 54
- 480 • 333 • 2161 54
Related products and manuals for Networking Comtech EF Data CME-5200
(154 pages)Chicago Electric 68861 manuales
Manuales del propietario y guías del usuario para Herramientas Eléctricas Chicago Electric 68861.
Ofrecemos 1 manuales en pdf Chicago Electric 68861 para descargar gratis por tipos de documentos: El manual del propietario
Comments to this Manuals