Comtech-ef-data SMS-458B User Manual download pdf (Page 46)

SMS-458B Modem Protection Switch Revision 2

Operation MN/SMS458B.IOM

3–10

3.4.2.8 Prime Channel Unit Menu

This menu displays the current addresses of active prime channel units (Version 2.02 or

greater). Addresses of 1 through 255 are valid.

1. Enter a new address and press [ENT] to load the address into memory.

2. If no address is entered for an active channel unit, an M:N fault results.

3.4.2.9 Backup Channel Unit Menu

This menu displays the current addresses of active backup channel unit (Version 2.02 or

greater). Addresses of 1 through 255 are valid.

1. Enter a new address and press [ENT]to load the address into memory.

2. If no address is entered for an active channel unit, an M:N fault results.

Note: To avoid corrupting the configurations of the prime modems, do not use the global

address “0”.

3.4.3 Modem Setup

To enter, change, or view the modem setup configuration, enter the MODEM SETUP

menu. The MODEM SETUP functions are as follows:

Function Description

DOWNLINK Downlink assignment (1 through 4) is selected and displayed for

demodulators.

MOD PRIORITY The prime modulator priorities are selected and displayed

DEMOD PRIORITY The prime demodulator priorities are selected and displayed.

DEMOD DELAY The prime demodulator online delay is selected and displayed.

MOD DELAY The prime modulator online delay is selected and displayed.

SELECT C/U The presence of an external channel unit or buffer is selected and

displayed.

1. Press [F1] or [F2] to select prime or backup modems.

2. View the parameters by using the [NEXT] and [PREV] keys.

3. A flashing cursor will be displayed over the selected parameter.

To enter data or change a parameter, the keypad is used to enter the data. When all data

or changes for that parameter are correct, press the [ENT] key to load the information

into memory.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 125 126

No comments

Comtech-ef-data SMS-458B User Manual Page 46