Comtech-ef-data CRS-500 User Manual download pdf (Page 127)

CRS-500 1:N Redundancy System Revision 2

CSU Front Panel Operation MN-CRS500

7–11

1. Only the first 20 characters on the bottom line of each community screen

are available.

2. All printable ASCII characters are available with the exception of the

backslash ‘/’ (ASCII code 92) and tilde ‘~’ (ASCII code 126).

3. You must reboot the system in order for changes to the Read and/or Write

Community strings to take effect.

CONFIG: IP  SNMP  Read

SNMP Read Community:

public

To edit the SNMP Read Community string, use the ◄ ► arrow keys to select the character to

edit, and then use the ▲▼ arrow keys to edit that character. Press ENTER when done. All

trailing spaces are removed from the Read Community string upon entry.

CONFIG: IP  SNMP  Write

SNMP Write Community:

private

To edit the SNMP Write Community string, use the ◄ ► arrow keys to select the character to

edit, and then use the ▲▼ arrow keys to edit that character. Press ENTER when done. All

trailing spaces are removed from the Write Community string upon entry.

7.2.2.1.3.2 CONFIG: IP  Mdm-IP (Modem IP Address)

Mdm IP Addr for slot 01:

000.000.000.000/00

View or edit the Modem IP Address for switch-to-modem communication here.

To edit the Modem IP Address:

• On the top line, use the ◄ ► arrow keys to select the Slot (modem) to edit (01 through

11).

• Once you select the appropriate slot, use the ◄ ► arrow keys to first navigate to the

bottom line, and then use the

◄ ► arrow keys once more to select the digit to edit.

Finally, use the ▲▼ arrow keys to edit that digit.

• Press ENTER when done.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 217 218

No comments

Comtech-ef-data CRS-500 User Manual Page 127